Canon EOS 20D Online Store

YN-560 Flash Speedlight For Canon1DS/5D/5DII/7D/10D/20D For Sale

This item has been shown 489 times.

YN-560 Flash Speedlight For Canon1DS/5D/5DII/7D/10D/20D:
$75

Yongnuo YN-560 Flash Speedlite for Canon Nikon PENTAX OLYMPUS

YN560 is a bran-new flash specially designed for professional creative photography. Compared with YN460-II and YN460, it has the following bran-new features:
A bran-new appearance: The bran-new appearance looks more beautiful, creditable, comfortable and professional.
New power zoom function: By pushing the button on the flash, it can make the flash covered focal length range from 24 to 105mm.
GN58 @ ISO100, 105mm: YONGNUO gives YN560 a higher guide number which reaches the level of the mainstream hot shoe flashes.
The improved wireless triggering sensor: YONGNUO improves the wireless triggering sensor for YN560, which makes the S1 and S2 mode can be used in outdoor environment and the wireless triggering distance is as long as 15m..
Sound indicator: When the charging process is finished, the flash will give a tick sound, so you may concentrate on the creation process. (Note: the sound can be closed).
New charging socket for external power pack: YN560 adds a charging socket for external power pack, to meet your higher demand for charging recycle.
New PC synchronous port: YN560 adds a standard PC synchronous port, which makes it simpler for you to use the PC synchronous line.
Super speed of charging recycle: It only takes 3 seconds in charging after full power output. Even without new batteries, you can get the super charging speed that it only needs 4~5 seconds; so you can completely get rid of the nightmare of anxious waiting for charging. In addition, you can use the external power pack to accelerate the charging speed once more.
Supporting high-speed continuous shooting: Under the output level of 1/8 or below, YN560 can support the 8FPS high-speed continuous shooting.
The improved power saving mode: YONGNUO designs the power saving mode for YN560. In the power saving mode, the flash will get automatic shutdown sooner; in the non-saving mode, it will take a longer time before automatic shutdown.
The more fine output control: The output control of YN560 is more fine, which ranges from 1/128 to 1/1 and each class of flash output has 8 small fine tuning stalls; With its zooming flash head, YN560 makes you nearly achieve your anticipant lighting effect.
The automatic setting saving: YN560 can automatically save your current setting.

This YN-560 can NOT work on TTL mode

Model information

Brand

Yongnuo

Model

YN560

Output specs

Guide Number (m)

39 (ISO 100, 35mm)

Manual Power Settings

1/1 – 1/2 – 1/4 – 1/8 – 1/16 – 1/32 – 1/64 – 1/128

Flash duration (full power)

1/200

Recycle time specified
(at full power)

3 sec alkaline

Triggering

Standard flash foot

standard

PC Synch Port

yes

Optical Slave

2 modes (1 w/ pre-flash suppresion)

Other trigger

none

Standby mode

can be adjusted (30 mins max)

Flash head features

Swivel

-180 to +90 degrees

Tilt

-7 to +90 degrees

Manual zoom head

(18) 24-105

Motor zoom

2nd reflector

LCD display

Power supply

Batteries used

4 x AA

External power source

Yongnuo SF-18C or SF-17C

Nikon TTL

D-TTL

i-TTL

CLS wireless slave

CLS wireless master

Canon TTL

E-TTL

E-TTL II

E-TTL(II) wireless slave

E-TTL(II) wireless master

1. Reflection board

3. Flash light’s head

4. External power pack socket

5.PC port (for input)

6.Contact cover

7.Battery chamber’s cover

8.Optical control sensor

9.Locking ring

10. Hot shoe stand

11. Hot shoe pin

12. Mode indicator (M,S1,and S2): It indicates the current flash mode

13. Output lecel indicator: It can regulate the output power by setting the button;there are 8 levels for output level adjustment.It indicates the output power and the fine-tuning; it indicates the coverage of the current focal length when adjusting the focal length.

14. The sound switch: A short press will enable or disable the sound indicator;hold the button to turn on or turn off the power saving mode.

15. Mode switch button: The mode of the flash light will be switched among the M/S1/S2 in circle for each press

16. Charging indicator / Test button: The lighting of red light shows that charging process is finished and flash can be used; the lighting of green light shows thatit is in charging or a shortage of power; the alternate flashing of red and green lights shows overheat protection. If you press this test button(PILOT),the flash will give a test flash.

17. Power Save nidicator: A long-time lighting indicates that the power saving mode is disabled;a longtime non-lighting indicates that the power saving mode has been enabled;when the power saving mode is enabled,the power save indicator will flash which shows that it has stepped into the dormancy state.

18. Flash head manual motor zoom: You can adjust the zoom range by setting [+] and [-] key (24,28,35,50,70,80,105mm).

19. Power switch: the power of the flash light can be opened or closed by holding this button for 2 seconds.

20. Power adjustment button: Adjust the power output by [LEFT] [RIGHT] and make fine tuning of the current power output by [UP] [DOWN] and [OK] in the middle.

Specification:

Circuit design

Insulated Gate Bipolar Transistor(IGBT)

Guide Number

58 meters (ISO 100, 105mm)

Flash mode

M, S1, S2

Zoom range

24, 28, 35, 50, 70, 80, 105mm

Vertical rotation angle

-7~90 degrees

Horizontal rotation angle